| CTE Series Engraver |
|
Features :
 "Hiwin" high precision ball screw transmission, ceramic self lubricate bush.
3D engraving, max cutting 9m/min.
32 bits DSP control system, work alone design, use SD card memory storage.
High Frequency high speed spindle, Digital rotation adjustment.
Use micro steeping drive technique, higher cutting speed, higher resolution.
Support compatible g-code protocol, generate by cam software such MastCam, type-3, Enrout, ArtCad, Cimatron etc.
Specifications :
| Model |
CTE3025 |
| Table Size |
520*500mm |
X.Y.Z
Working Area |
300*250*100mm |
| Max Rapid Traverse |
9000mm/min |
| Max Cutting Speed |
6000mm/min |
| Resolution |
0.05mm |
| Repeatability |
0.05mm |
| Max Feeding Height |
100mm |
| Max Cutting Length |
300mm |
| Motor Driver |
Micro-step |
| Power Consumption |
300W |
| Spindle |
1000W/water cooling/Φ6 Φ3.175 |
| Spindle Speed Range |
6000 - 24000 rpm |
| Interface |
USB/SD Card Output Directly |
| Protocol |
HP/GL, G-code Compatible |
| Operation Envrionment |
Temperature : +5C~+35°C, relative temperature 30% - 75% |
| Power Voltage |
AC220V ± 10% 50Hz |
| Net Weight |
50Kg |
Dimension
W*D*H |
630*580*635mm |
|
